Orthopaedic Pin and Drill Packs

To order, call 800-535-6638

Orthopaedic Pin and Drill Packs

Fabricated from 17-4 stainless steel and are subjected to strenuous inspection programs to assure exceptional results.

Brasseler USA Surgical’s replacement Orthopaedic Pin and Drill Packs are available in several different variations compatible with major OEM knee instrumentation systems. They can be used for a variety of techniques and procedures and are subjected to strenuous inspection programs to assure exceptional results.

Orthopaedic Pin and Drill Packs

Compatible with Stryker® Knee Instrumentation Systems
Fabricated from 17-4 stainless steel
Brasseler Part No. OEM Part No. Description Diameter (mm) Length (mm) Packaging
BMA-S90008S 7650-2038
7650-1038
Headless Pin
(Square End & Trocar Point)
3.1 88.9 4 Pins Per Pack
Sterile
BMA-S90010S 7650-2038A
7650-1038A
Headless Pin, Fluted
(Square End & Trocar Point)
3.1 88.9 4 Pins Per Pack
Sterile
BMA-S90012S 6541-4-003 Headless Pin
(Square End & Trocar Point)
3.1 76.2 4 Pins Per Pack
Sterile
Compatible with Stryker® Ortholock™ Navigation System
Fabricated from 316L stainless steel
Brasseler Part No. OEM Part No. Description Diameter (mm) Length (mm) Packaging
ST6007-003-100 6007-003-100 Navigation Pin
(Square End & Trocar Point)
3.0 100.0 2 Pins Per Pack
Sterile
ST6007-003-150 6007-003-150 Navigation Pin
(Square End & Trocar Point)
3.0 150.0 2 Pins Per Pack
Sterile
ST6007-103-110 6007-103-110 Navigation Pin
(Square End, Self Driling, Trocar Point)
3.0 110.0 2 Pins Per Pack
Sterile
ST6007-104-150 6007-104-150 Navigation Pin
(Square End, Self Driling, Trocar Point)
4.0 150.0 2 Pins Per Pack
Sterile
Compatible with DePuy Synthes® Knee Instrumentation Systems
Fabricated from 17-4 & 15-5 stainless steel
Brasseler Part No. OEM Part No. Description Diameter (mm) Length (mm) Packaging
BMA-S90006S 2490-95-000
2490-95
Fixation Pin
(Round End & Trocar Point)
3.1 76.2 4 Pins Per Pack
Sterile
BMA-S90007S 86-4192-000
86-4192
Fixation Pin (Triangular End & Trocar Point) & Twist Drills (Round End) 3.1 76.2 4 Pins & 2 Drlls Per Pack
Sterile
DP86-9117 86-9117
869117
Fixation Pin
(Round End & Trocar Point)
3.1 76.2 10 Pins Per Pack
Non-Sterile
BR2544-00-111 2544-00-111 Threaded Headed
& Universal Pin
3.2 67.0 2 Threaded Headed & 4 Universal Pins Per Pack, Sterile
BR9505-02-302 9505-02-302 Threaded Pin 3.2 76.2 4 Pins Per Pack
Sterile
BR9505-02-303 9505-02-303 Threaded Headed Pin 3.2 67.0 4 Pins Per Pack
Sterile
Compatible with Smith+Nephew® GENESIS® Total Knee System
Fabricated from 316L stainless steel
Brasseler Part No. OEM Part No. Description Diameter (mm) Length (mm) Packaging
BML-S90004 114968 Twist Drill (Round End) & Fixation Pin (Round End/Cone Point) 3.2 127/76 1 Drill & 3 Pins Per Pack
Sterile
BMA-S90006S 71210002 Fixation Pin (Triangular End & Trocar Point) & Twist Drills (Round End) 3.1 76.2 4 Pins Per Pack
Sterile
Compatible with Zimmer® Biomet® Knee Instrumentation Systems
Fabricated from 316L stainless steel
Brasseler Part No. OEM Part No. Description Diameter (mm) Length (mm) Packaging
ZB00-5901-020-00 00-5901-020-00 Headless Drill Pin
(Hex End & Trocar Point)
3.2 75.0 4 Pins Per Pack
Sterile

Steam Sterilization …. Type Minimum Temperature / Minimum Exposure Time / Minimum Dry Time


Pre-Vacuum (Wrapped) …. 270°F (132°C) / 4 minutes / 30 minutes
Gravity (Wrapped) …. 270°F (132°C) / 15 minutes / 30 minutes

  • All cycles require a minimum of 30 minutes dry time.
  • Observe AAMI and hospital guidelines for steam sterilization and the sterilizer manufacturer’s written instructions for cycle parameters and load configurations.
How to Purchase

Give us a call at 800-535-6638 or send us a message and one of our knowledgable representatives will be in touch.

This field is for validation purposes and should be left unchanged.
Brasseler USA® is a trademark of Peter Brasseler Holdings, LLC or its affiliates. Stryker® is a registered trademark of Stryker Corporation or its affiliates. ConMed®, Linvatec® ,Hall®, Hall 50™, MPower®, PowerPro® and VersiPower® Plus are registered trademarks of ConMed® Corporation. DePuy® and Synthes® are registered trademarks of DePuy® Synthes® , Inc., a Johnson & Johnson Company. Zimmer® and Biomet® are registered trademarks of Zimmer® Biomet®. All other trademarks are trademarks of their respective owners or holders. Brasseler USA® Surgical products are sold by Brasseler U.S.A. Medical, LLC, One Brasseler Boulevard, Savannah, Georgia, 31419, United States.